Saturday 30 June 2012

HP 6735B BLINK CAP LOCK 5 TIMES, NO OTHER ACTIVITY- SOLVED

SORRY I WILL NO BE ABLE TO ADD PICTURES HERE BECAUSE AM VERY BUSY THIS PERIOD BUT IT WILL BE AVAILABLE ANYTIME AM DISPOSED.
I READ A LOT OF SOLUTION ON GOOGLE ON USING OVEN TO SOLVE IT BUT I HAVE TRYED IT SEVERAL AND DISCOVERED THAT YOU HAVE ONLY 10% CHANCE OF SUCCESS.
ACTUALLY THIS PROBLEM IS RELATED TO 1.MISSING COMPONENT DUE TO HEAT WHICH CAN BE FOUND BY CAREFUL INSPECTION OF THE MOTHERBOARD. 2. FROM THE AMD NORTH AND SOUTH BRIDGE. 3. FROM SHORTED MOSFET BUT THIS ONE IS NOT COMMON.
NO 2 IS MOST COMMON AND THE BEST WAY TO SOLVE IT WITHOUT REPLACING THE CHIP IS TO USE BGA REWORK STATION. SET THE PRE-HEATER  AT 270C AND PLACE THE MOTHERBOARD FOR 2 MINUTES, THEN SWITCH ON INFRARED FOR 90 SECONDS AND ALLOW IT TO COOL.THAT'S ALL.REMEMBER TO CLEAN THE FAN CLOGS
Posted by at

7 comments:

  1. yousuph27 August 2012 at 01:00

    hello. Pls i want to ask the difference between BGA rework station and SMD rework station

    ReplyDelete
  2. Unknown2 November 2012 at 13:40

    bga rework station has preheater and uses infra red heater unlike smd rework station. the pre heating is very important in this process.
    thanks

    ReplyDelete
  3. Cvorke3 November 2012 at 12:08

    Which component could be missing or which mosfet cod be shorted?
    Since I already do reballing on both bridges but still the same.

    ReplyDelete
  4. Unknown4 November 2012 at 04:23

    please explain exactly what yours is doing.
    i will be glad to assist you.thanks

    ReplyDelete
  5. yousuph16 December 2012 at 11:08

    heloo. i downloaded a pdf file titled TESTING COMPONENT. i got d link via dis site. this pdf file is password protected. pls kindly help me out with the password.

    tanx

    ReplyDelete
  6. Unknown25 March 2013 at 03:18

    onyibro12

    ReplyDelete

Subscribe to: Post Comments (Atom)